Solder Pellets

  1. Strip the proper size cable so the exposed cable will reach the top of the battery terminal. The cable installation should fit snugly against the top. Insert proper size solder pellet and apply solder flux.

  2. Secure the battery terminal in a vise. Slide the proper size heat shrink tubing over the cable. Insert the exposed cable into the terminal. Heat the base of the battery terminal while applying gentle downward pressure on the cable.

  3. As the solder melts, allow the cable to slide into the terminal until the installation is snug against the top of the terminal. Remove from heat. Slide the heat shrink tubing over the connection. Apply indirect heat to the tubing.

  4. Allow connection to cool. You now have “The Perfect Connection”.

Part #

Description

Color Code

4100SP

4 AWG.

Gray

4200SP

2 AWG.

Green

4300SP

1 AWG.

Pink

4400SP

1/0 AWG.

Black

4500SP

2/0 AWG.

Orange

4600SP

3/0 AWG.

Purple

4700SP

4/0 AWG.

Yellow

Jumper Harnesses

Harnesses made with 2/0 welding cable, Heavy duty plated lugs and dual wall heat shrink tubing.

Custom Harnesses available.

Part #

Description

H1611WCR8

8" Red

H1611WCB8

8" Black

H1611WCR16

16" Red

H1611WCB16

16" Black